For more info: sales@tangkasanugerah.com

Home / Products / GUNT Hamburg

Didirikan di Hamburg, Jerman pada tahun 1977, GUNT terus berkembang dan menjadi pelopor dalam peralatan didaktikal (didactic equipment). Saat ini GUNT menyediakan peralatan didaktikal dalam berbagai area seperti : engineering mechanics, mechatronics, thermal engineering, fluid mechanics & machinery, hydraulics for civil engineering.

Kami PT Tangkas Cipta Anugerah (PT TCA) menjual produk-produk GUNT. Anda juga bisa melihat spesifikasi, review dan harga produk GUNT melalui website kami, tangkasanugerah.com. Tangkas Anugerah juga melayani penjualan dan pengiriman ke seluruh kota di Indonesia seperti Jakarta, Tangerang, Bekasi, Cikarang, Karawang, Bandung, Medan, Surabaya, Semarang, Irian Jaya, Sulawesi, Banjarmasin, Balikpapan

GUNT Hamburg
View by Categories

SE 110.48 Bending test, plastic deformation

PT 500.01 Laboratory trolley

PT 502 Field balancing

TM 150.20 System for data acquisition

FL 152 Multi-channel measuring amplifier

SE 110.14 Elastic line of a beam

FL 100 Strain gauge training system

RT 350 Operation of industrial controllers

PT 106 Dimensional metrology I: training kit 6

GL 300.10 Cutaway model electromagnetic single disk brake

SE 110.57 Buckling of bars

TM 220 Belt drive and belt friction

RT 578 Control of four variables from process engineering

ET 262 Geothermal probe with heat pipe principle

WL 230 Condensation process

WL 422 Heat conduction in fluids

WL 420 Heat conduction in metals

WL 372 Radial and linear heat conduction

WL 460 Heat transfer by radiation

WL 362 Energy transfer by radiation

WL 440 Free and forced convection

WL 352 Free and Forced Convection Unit

WL 102 Change of state of gases

WL 203 Fundamentals of pressure measurement

WL 920 Temperature measurement

WL 201 Fundamentals of humidity measurement

RT 124 Fuzzy control: carrier vehicle with inverted pendulum

RT 123 Fuzzy Control: ball-on-plate

RT 122 Fuzzy control: inverted pendulum

RT 121 Fuzzy control: ball-on-beam

IA 520 Computer integrated manufacturing and handling system

RT 522 Flow control trainer

RT 542 Temperature control trainer

RT 532 Pressure control trainer

RT 552 pH value control trainer

RT 512 Level control trainer

RT 450.04

RT 050 Training system: speed control, HSI

RT 450.04 Controlled system module: temperature

RT 450.03 Controlled system module: pressure

RT 450.02 Controlled system module: flow

RT 450.01 Controlled system module: level

RT 450 Process automation training system: base module

RT 650.50 Process control software for RT 512 - RT 552 series

RT 650.40 I&C Software for RT 614 - RT 674 Series

RT 674 Flow / level control demonstration unit

RT 644 Temperature control demonstration unit

RT 634 Pressure control demonstration unit

RT 624 Flow control demonstration unit

RT 040 Training system: temperature control, HSI

RT 614 Level Control Demonstration Unit

RT 030 Training system: pressure control, HSI

RT 060 Training system: position control, HSI

RT 020 Training system: flow control, HSI

RT 010 Training system: level control, HSI

RT 380 Optimization of control loops

RT 370 Setup of field bus systems

RT 360 Networking of industrial controllers

RT 350 Operation of industrial controllers

RT 710 Hydraulic servo system

RT 701 Components set electrohydraulics

RT 700 Training system: fundamentals of hydraulics

RT 770 Training system: pneumatics, electro-pneumatics and PLC

IA 130 PLC module

RT 800 PLC application: mixing process

IA 210 PLC application: materials handling process

IA 110 Calibrating a pressure sensor

WL 202 Fundamentals of temperature measurement

IA 120 Principles of industrial sensors

PT 501 Roller bearing faults

MT 210 Assembly & maintenance exercise: refrigeration

RT 396 Pump and valves and fittings test stand

RT 395 Maintenance of valves and fittings and actuators

HL 962.04 Standard chemicals pump with magnetic clutch

HL 962.03 Side channel pump

HL 962.02 Canned motor pump

HL 962.01 Standard chemicals pump

HL 962 Assembly stand for pumps

MT 186 Assembly & maintenance exercise: gear pump

MT 185 Assembly & maintenance exercise: in-line centrifugal pump

MT 184 Assembly & maintenance exercise: piston pump

MT 183 Assembly & maintenance exercise: diaphragm pump

MT 182 Assembly & maintenance exercise: screw pump

MT 181 Assembly & maintenance exercise: multistage centrifugal pump

MT 180 Assembly & maintenance exercise: centrifugal pump

MT 140.20

MT 140.02 Assembly exercise: piston compressor

MT 140.01 Assembly exercise piston compressor: functional test

MT 140 Assembly station: piston compressor

HL 960.01 Assembly and alignment of pumps and drives

HL 960 Assembly station pipes and valves and fittings

MT 162 Hydraulic valves and fittings test stand

MT 158 Assembly exercise: ball valve and shut-off valve

MT 157 Assembly exercise: butterfly valve and non-return valve

MT 156

MT 154

MT 110

FT 200

FT 102

FT 100

FT 913

FT 909

FT 907

FT 905

FT 903

FT 901

MG 200

MG 120

MG 110

MG 100

PT 202

PT 201

PT 106

PT 105

PT 104

PT 103

PT 102

PT 101

ET 499.30

ET 499.01 Cutaway model: hermetic refrigerant compressor

VS 108

VS 105

VS 101

HM 700.22

HM 700.20

HM 700.17

VS 109

HM 700.16

VS 107

VS 106

VS 104

VS 103

VS 102

HM 700.15

HM 700.14

HM 700.13

HM 700.12

HM 700.11

HM 700.10

HM 700.09

HM 700.08

HM 700.02

HM 700.01

HM 700.07

HM 700.06

HM 700.05

HM 700.04

HM 700.03

TZ 200.02 Engineering drawing: casting

TZ 200.08 Engineering drawing: safety catch

TZ 200.09 Drilling jig for flat part

TZ 200.06 Drilling jig for an annular disc

TZ 200.04 Drilling jig for a casting

TZ 200.07 Lever shears

TZ 200.01 Bending device

TZ 140 Prismatic work samples with slanted cut-outs

TZ 130 Prismatic work samples with cut-outs parallel to edges

TZ 120 Cylindrical work samples with slanted cut-outs

TZ 110 Cylindrical work samples with cut-outs parallel to axis

WP 410 Impact test 300Nm

WP 400 Impact test 25Nm

WP 600 Creep rupture test

WP 140 Fatigue strength test

WP 510 Torsion test 200Nm motor drive

WP 500 Torsion test 30Nm

SE 100 Frame for load testing 400kN

WP 310 Materials testing, 50kN

WP 300.11

WP 300.10

WP 300.04

WP 300 Materials testing, 20kN

PT 500.04 Computerised vibration analyser

PT 500.05 Brake & load unit

PT 500.19 Electromechanical vibrations kit

PT 500.18 Vibrations in fans kit

PT 500.17 Cavitation in pumps kit

PT 500.16 Crank mechanism kit

PT 500.15 Damage to gears kit

PT 500.14 Belt drive kit

PT 500.13 Couplings kit

PT 500.12 Roller bearing faults kit

PT 500.11 Crack detection in rotating shaft kit

PT 500.10 Elastic shaft kit

PT 500 Machinery diagnostic system, base unit

CE 105 Corrosion of metals

TM 262 Hertzian pressure

TM 260.06 Pressure distribution in journal bearings

TM 260.05 Dynamic friction in cylindrical pin - roller

TM 260.04 Frictional vibrations

TM 260.03 Dynamic friction in pin - disk

TM 260.02 Elasto-hydrodynamic behaviour

TM 260.01 Rolling friction in friction wheels

TM 260 Drive unit for tribological investigations

TM 290 Journal bearing with hydrodynamic lubrication

TM 282 Friction in journal bearings

TM 280 Pressure distribution in journal bearings

MT 190.01 Assembly data acquisition for materials tester

MT 190 Assembly materials tester

MT 172 Alignment of drives, shafts and gears

MT 110.02 Assembly spur wheel / worm gear mechanism

MT 152 Assembly spur gear

MT 171 Assembly hydrodynamic journal bearing

MT 170 Assembly shaft with journal bearings

GL 212 Dynamic behaviour of multistage planetary gears

GL 210 Dynamic behaviour of multistage spur gears

GL 112 Investigation of cam mechanisms

AT 200 Determination of gear efficiency

GL 200 Lathe gear

GL 430 Assembly control gear

GL 420 Assembly combined gears

GL 410 Assembly simple gears

GL 110 Cam mechanism

MG 911 Roller bearings kit

MG 905 Thread types kit

MG 903 Screw-locking devices kit

MG 901 Nuts and bolts kit

TM 220

TM 320 Screw connections testing

TM 310 Thread testing

GL 300.12 Cutaway model: pedestal bearing

GL 300.08 Cutaway model: multiple-disk clutch

GL 300.07 Cutaway model: control gear

GL 300.06 Cutaway model: variable speed belt drive

GL 300.05 Cutaway model: planetary gear

GL 300.04 Cutaway model: two-stage spur gear

GL 300.03 Cutaway model: spur gear

GL 300.02 Cutaway model: mitre gear

GL 300.01 Cutaway model: worm gear

TZ 300 Assembly of lever press

TZ 200.71 Assembly of lever shears

TZ 200.61 Engineering drawing: rotationally symmetrical components

TZ 200.11 Assembly of bending device

TZ 100 Engineering drawing: three-dimensional display

TM 625 Elastic shafts

TM 620 Bending elasticity in rotors

TM 182.01 Piston compressor for TM 182

TM 182 Vibrations on machine foundations

TM 180 Forces in reciprocating engines

TM 170 Balancing apparatus

HM 159.11 Natural vibration on a ship model

SE 110.58 Free vibrations in a bending beam

TM 140 Free and forced torsional vibrations

TM 150.02 Free and damped torsional vibrations

TM 150 Vibration trainer

TM 155 Free and forced vibrations

TM 164 Coil spring vibrations

TM 163 Torsional vibrations

TM 162 Bifilar/trifilar suspension of pendulums

TM 161 Rod and gravity pendulum

TM 612 Kinetic model: flywheel

TM 611 Rolling disk on inclined plane

TM 610 Rotational inertia

TM 632 Centrifugal governor

TM 630 Gyroscope

TM 605 Coriolis force

TM 600 Centrifugal force

TM 125 Cable winch

TM 124 Worm gear unit

TM 123 Spur gear unit

TM 122 Equilibrium of moments on a differential pulley block

TM 121 Equilibrium of moments on pulleys

GL 105 Kinematic model: gear drive

GL 100 Principle of gear units

KI 160 Kinematic model: Ackermann steering mechanism

KI 150 Kinematic model: Hooke's coupling

KI 140 Kinematic model: Whitworth quick return mechanism

KI 130 Kinematic model: four-joint link

KI 120 Kinematic model: crank slider

KI 110 Kinematic model: crank mechanism

FL 210 Photoelastic demonstration

FL 200 Photoelastic experiments with a transmission polariscope

FL 140 Stress and strain analysis on a thick-walled cylinder

FL130

FL 120 Stress and strain analysis on a membrane

FL 151

FL 101 Strain gauge application set

FL 102 Determining the gauge factor of strain gauges

FL 100 Strain gauge training system

WP 130 Verification of stress hypotheses

FL 160 Unsymmetrical bending

WP 120 Buckling behaviour of bars

WP 121 Demonstration of Euler buckling

SE 110.19 Investigation of simple stability problems

TM 400 Hooke’s law

SE 110.44 Deformation of trusses

FL 170 Deformation of curved-axis beams

SE 110.20 Deformation of frames

WP 100 Deformation of bars under bending or torsion

SE 110.29 Torsion of bars

SE 110.47 Methods to determine the elastic line

WP 950 Deformation of straight beams

SE 110.16 Parabolic arch

SE 110.17 Three-hinged arch

SE 110.12 Lines of influence on the Gerber beam

SE 110.18 Forces on a suspension bridge

SE 110.50 Cable under dead-weight

WP 961 Beam on two supports: shear force diagram

WP 960 Beam on two supports: shear force & bending moment diagrams

SE 110.21 Forces in various single plane trusses

SE 130.01 Truss beam: Warren girder

SE 110.22 Forces in an overdeterminate truss

TM 225 Friction on the inclined plane

TM 210 Dry friction

SE 110.53 Equilibrium in a single plane, statically determinate system

FL 111 Forces in a simple bar structure

TM 110.03 Supplementary set - gear wheels

TM 110.02 Supplementary set - pulley blocks

TM 110.01 Supplementary set - inclined plane and friction

SE 112

WP 962 Beam on two supports: bending moment diagram

TM 232 Bearing friction

TM 200 Fundamentals of mechanical friction

SE 130 Forces in a Howe truss

EM 049 Equilibrium of moments on a two-arm lever

TM 115 Forces in a crane jib

TM 110 Fundamentals of statics

Subscribe now

2018 Tangkas Cipta Anugrah.
All right reserved.

Available at

tokopediabukalapakshopee

2018 Tangkas Cipta Anugrah.
All right reserved.

Loading...