For more info: 021 55734344

Home / Products

HL 960.01 Assembly and alignment of pumps and drives

FEATURES:

 

  • Installing a pump in a system
  • Alignment of electric motor and pump by different methods

DESCRIPTION

Technical Description

A complete work process when repairing work machines such as pumps consists of the following steps: assembly – alignment – test. The trainer described here was designed with industrial conditions in mind and is primarily intended for the practical training of maintenance engineers. It also offers a variety of topics and starting points for training in vocational schools.

The HL 960.01 trainer enables students to practise the entire maintenance process. On its own, the trainer can be used for assembly exercises with the option of aligning the drive and the pump. Combined with HL 960 Assembly Station Pipes and Valves and Fittings, the HL 960.01 trainer can be used as a test system for the completely assembled piping system.

The trainer consists of an electric drive motor, a standard pump and a piping system with storage tank and can be operated independent of the water supply mains. Students can practise exchanging pumps for inspection or repair as part of the assembly exercise. The exercises cover the entire system and its individual subassemblies. A manometer displays the pressure at the outlet of the pump.

The position of the electric motor can be adjusted in three directions for alignment purposes. The alignment can either be checked in a conventional manner with a straight edge or with the reverse alignment method using two dial gauges. Non-contact, microprocessor-aided methods can also optionally be used (specific alignment systems are not included in the scope of delivery).

The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments
- installing a pump in a system
- connecting and aligning motor and pump
- familiarisation with various alignment methods: straight edge, dial gauges    
- familiarisation with key system components
- electrical installation of motor and switching elements
- assembly of pipes and instrumentation 
- detail installation on a standard centrifugal pump
- reading and understanding engineering drawings, product documentation and circuit diagrams
- familiarisation with maintenance procedures
- planning assembly and maintenance steps

in conjunction with HL 960
- operational testing in a pipe network

FEATURES

Specification
[1] mobile system for alignment of a standard pump and its drive motor
[2] asynchronous electric motor with constant speed
[3] electric motor with positioning frame and fit plates for alignment
[4] pump and motor connected via coupling
[5] checking of alignment using straight-edge or dial gauges
[6] manometer at pump outlet
[7] pump with ball valves at inlet and outlet
[8] closed water circuit 
[9] the system forms part of the GUNT assembly, maintenance and repair practice line


Technical Data

Centrifugal pump
- max. flow rate: 300L/min
- max. head: 16,9m
- power consumption: 750W
Asynchronous motor, single phase
- power output: 1100W
- speed: 3000min-1
Storage tank: 96L

 
Measuring ranges
- dial gauges: 0...3mm / 0...20mm,

  resolution: 0,01mm 
- manometer: 0...1,6bar


Dimensions and Weight
LxWxH: 1250x830x1520mm
Weight: approx. 122kg
Required for Operation 230V, 50/60Hz, 1 phase


Scope of Delivery

1 trainer with centrifugal pump and drive
1 set of measuring aids, consisting of
- 2 dial gauges 0...3mm
- straight-edge
- test shaft for sag measurement
- dial gauge with magnetic holder, 0...20mm
1 set of tools
1 set of instructional material

Subscribe now


Loading...