For more info: sales@tangkasanugerah.com
Technical Description
Vibration analysis is a key tool in estimating the condition of a roller bearing. The slow change in the vibration spectrum provides indications of the remaining life of a bearing and can be used as a criterion for its replacement. The spectral distribution can deliver accurate information on the type and location of the damage.
PT 501 contains six interchangeable roller bearings on which different faults can be detected and explained. The radial load on the bearing is set within broad limits using the loading device.
An electric motor with variable speed via frequency converter is used as drive. An acceleration sensor with measuring amplifier serves to measure the vibrations at the bearing housing. The speed is measured with an optical sensor.
The measured values are transmitted directly to a PC via USB. The software for vibration analysis is included. The analysis software offers the following features: Two-channel oscilloscope for investigations in the time range; two-channel spectrum analyser for investigations in the frequency range; vibration measuring device; envelope analysis for bump effects and roller bearing damage.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Learning Objectives / Experiments
- vibrational spectrum of the running noise of roller bearings
- influence of damage to outer race, inner race or roller body, on the spectrum
- estimating service lives of roller bearings
- influence of the lubricant on the vibration spectrum
- detection of faulty roller bearings
- understanding and interpreting frequency spectra
- use of a computerised vibration analyser
Specification
[1] investigation of the vibrations of roller bearings
[2] roller bearings with damaged outer race
[3] roller bearings with faulty inner race
[4] roller bearings with damaged rolling element
[5] roller bearings with combined damage
[6] long-running roller bearings
[7] new and undamaged roller bearings
[8] drive motor with variable speed via frequency converter
[9] radial loading of bearings via adjustable loading device
[10] vibration isolation of the foundation plate using rubber elements
[11] instruments: optical speed sensor, acceleration sensor to record vibration|
[12] software features: 2-channel oscilloscope;
2-channel FFT analyser; envelope analysis; run-up curve and order analysis
[13] GUNT software for vibration analysis under Windows Vista or Windows 7
Technical Data
Pendulum ball bearing of type NU204-E-TVP2
- inside diameter: d=20mm
- outside diameter: D=47mm
- width: 14mm
- number of rollers: 12
Drive motor
- speed: 100...3000min-1
- power: 370W
Acceleration sensor
- frequency range: 1...10000Hz
- sensitivity: 100mV/g
- resonance frequency: 32kHz
Optical speed sensor
- sampling width: 3...150mm
- laser class II, 675nm
Dimensions and Weight
LxWxH: 510x200x330mm (experimental unit)
LxWxH: 420x400x180mm (control unit)
Weight: approx. 25kg (total)
Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase
Scope of Delivery
1 experimental unit
1 control unit
6 roller bearings
1 set of accessories
1 GUNT software CD + USB cable
1 set of instructional material