RT 552 pH value control trainer
FEATURES:
- Experimental introduction to control engineering using an example of flow control1
- Construction of the system with components commonly used in industry1
- Digital controller with freely selectable parameters: P, I, D and all combinations1
- Integrated 2-channel line recorder1
- Optional process control software RT 650.50 available
- Construction of a complete networked system via Profibus interface possible
DESCRIPTION
Technical Description
This trainer provides a comprehensive experimental introduction to the fundamentals of control engineering using an example of flow control.
A pump delivers water from a storage tank through a piping system. The flow rate is measured by an electromagnetic sensor, which permits further processing of the measured value by outputting a standardised current signal. A rotameter indicates the flow. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is a control valve with electric motor operation. A ball valve in the outlet line enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected.
A process control software (RT 650.50) is optionally available. The software permits the construction of a complete networked system comprising multiple trainers from the RT 512 - RT 552 series. The key process variables can also be represented, and control functions executed.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Learning Objectives / Experiments
- fundamentals of control engineering
- real industrial control engineering components: controllers, transducers, actuators
- operation and parameterisation of the local industrial controller
* manually (by keyboard)
* using the RT 650.50 process control software
- investigation of disturbance and control response
- controller optimisation
- investigation of the properties of the open and closed control loops
- processing of process variables using external equipment, e.g. oscilloscope or plotter
- together with accessory RT 650.50 and other trainers (RT 512, RT 532 - RT 552): familiarisation with and use of process control software (SCADA)
FEATURES
Specification
[1] trainer for control engineering experiments
[2] flow control process, equipped with standard industrial components
[3] flow rate measurement by electromagnetic sensor
[4] rotameter for direct observation of the flow
[5] generation of disturbance variables by ball valve with scale in outlet line
[6] control valve with electric motor
[7] digital controller, parameterisable as a P, PI or PID controller
[8] 2-channel line recorder
[9] process variables X and Y accessible as analogue signals via lab jacks
Technical Data
Storage tank: 30L
Centrifugal pump
- power consumption: 250W
- max. flow rate: 150L/min
- max. head: 7m
- speed: 2800min-1
Rotameter: 0...1960L/h
Electromagnetic flow rate sensor: 0...6000L/h
Control valve with electric motor
- Kvs: 5,7m³/h
- stroke: 5mm
- characteristic curve equal-percentage
- valve-opening position sensor: 0...1000 Ohm
Line recorder
- 2x 4...20mA
- feed rate 0...7200mm/h, stepped
Controller
- process variables X, Y as analogue signals: 4...20mA
Dimensions and Weight
LxWxH: 1000x700x1750mm
Weight: approx. 110kg Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 trainer
1 set of cables
1 hose
1 set of instructional material
