For more info: 021 55734344
Gas laws belong to the fundamentals of thermodynamics and are dealt with in every training course on thermodynamics.
The WL 102 experimental unit enables two changes of state to be studied experimentally: isothermal change of state, also known as the Boyle-Mariotte law, and isochoric change of state, which occurs at constant volume. Transparent tanks enable the change of state to be observed. Air is used as the test gas.
In the first tank, positioned on the left, the enclosed air volume is reduced or increased using a compressor and hydraulic oil. This results in an isothermal change of state. The compressor can also operate as a vacuum pump. If the changes occur slowly, the change of state takes place at an almost constant temperature.
In the second tank, positioned on the right, the temperature of the test gas is increased by a controlled electric heater and the resulting pressure rise is measured. The volume of the enclosed gas remains constant. Temperatures, pressures and volumes are measured electronically, digitally displayed and transferred to a PC for processing.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
Learning Objectives / Experiments
- demonstrating the laws of state changes in gases experimentally
- isothermal change of state, Boyle-Mariotte law
- isochoric change of state, Gay-Lussac’s 2nd law
 experimental investigation of gas laws
 transparent measuring tank 1 for investigation of isothermic change of state
 hydraulic oil filling for changing volume of test gas
 built-in compressor generates necessary pressure differences to move the oil volume
 compressor can also be used as vacuum pump
 5/2-way valve for switching between compression and expansion
 transparent measuring tank 2 for investigation of isochoric change of state
 electrical heater with temperature control in tank 2
 sensors and digital displays for temperatures, pressures and volumes
 GUNT software for data acquisition via USB under Windows Vista or Windows 7
Compressor / vacuum pump
- power output: 60W
- pressure at inlet: 213mbar
- pressure at outlet: 2bar
Temperature controller: PID, 300W, limited to 80°C
- tank 1: 0...80°C
- tank 2: 0...80°C
- tank 1: 0...4bar absolute
- tank 2: 0...2bar absolute
- tank 1: 0...3L
Dimensions and Weight
Weight: approx. 50kg Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 experimental unit
1 GUNT software CD + USB cable
1L hydraulic oil
1 feed hopper
1 set of instructional material