Study of temperature control processes, 540 series
Didactic unit MT-542
A FURNACE TEMPERATURE
The model consists of a simulator of a furnace in which are located inside the heating (equipped with aluminium radiator) and the different temperature sensors.
On the left side of the oven is located a fan whose window can be closed by a lid, available on the reverse side of a ventilation window also with a lid.
The sensors contained on the model are:
- 1 integrated temperature transducer AD-590.
- 1 type J thermo-couple.
- 1 positive temperature coefficient resistance transducer PTC.
- 1 platinum resistive transducer PT-100.
The last three sensors above are in heat contact with another three integrated transducers AD-590 installed, and which serve as reference thermometers for these. Readings are taken from these transducers on the digital thermometer placed on the front panel of the model.
Printed connection terminals between the heater and the different sensors are included with the conditioning and control modules.
Training module CSH-547
SET POINT AND HYSTERESIS CONTROL
- Set point signal generator, adjustable via potentiometric control.
- Comparator with hysteresis, with adjustable strip and pilot light indicating output level (0 or 1).
Training module ACONDITERMO-547
THERMOCOUPLE AND PTC CONDITIONER
- PTC temperature sensor and thermocouple conditioners.
- Offset adjustment and gain controls.
Training module CONDIPLAT-547
ACONDICIONADOR DE AD-549 Y PT100
- Platinum resistance conditioner (PT100).
- AD-590 conditioner
- Offset adjustment and gain controls.
DESCRIPTION
Ref.: 9EQCAMT542
Included standard elements:
- Table-mounted frame.
- ALI-700 power supply module.
- Series 540 model and specific control modules
Standard accessories:
- Mains connection cable and 2 mm connectors.
- User Manual and Practical Manual.
The modules and units are as it follows:
FEATURES
Didactic unit MT-542
A FURNACE TEMPERATURE
The model consists of a simulator of a furnace in which are located inside the heating (equipped with aluminium radiator) and the different temperature sensors.
On the left side of the oven is located a fan whose window can be closed by a lid, available on the reverse side of a ventilation window also with a lid.
The sensors contained on the model are:
- 1 integrated temperature transducer AD-590.
- 1 type J thermo-couple.
- 1 positive temperature coefficient resistance transducer PTC.
- 1 platinum resistive transducer PT-100.
The last three sensors above are in heat contact with another three integrated transducers AD-590 installed, and which serve as reference thermometers for these. Readings are taken from these transducers on the digital thermometer placed on the front panel of the model.
Printed connection terminals between the heater and the different sensors are included with the conditioning and control modules.
Training module CSH-547
SET POINT AND HYSTERESIS CONTROL
- Set point signal generator, adjustable via potentiometric control.
- Comparator with hysteresis, with adjustable strip and pilot light indicating output level (0 or 1).
Training module ACONDITERMO-547
THERMOCOUPLE AND PTC CONDITIONER
- PTC temperature sensor and thermocouple conditioners.
- Offset adjustment and gain controls.
Training module CONDIPLAT-547
ACONDICIONADOR DE AD-549 Y PT100
- Platinum resistance conditioner (PT100).
- AD-590 conditioner
- Offset adjustment and gain controls.
