For more info: 021 55734344

Home / Products

Study of level processes and flow, 540 series

Didactic unit MD-544

LEVEL AND FLOW OF A DEPOSIT

The model has a water-tight tank with two compartments, one to control the level and the other for drainage; there is a motorised pump which transfers the liquid from one place to another, and a set of sensors:

  • For levels, using a float with linear potentiometer.
  • For levels, by variable capacity.
  • For levels, by ultrasound.
  • For flow, by differences in hydrostatic pressure.
  • For flow, by turbine.
  • For hydrostatic pressure.

Printed connection terminals between the pump motor and the different sensors are included with the conditioning and control modules.


Training module CSS-547

SETTING AND DRIVER FOR PUMP MOTOR

  • Set point generator (adjustable ramp and step).
  • Power amplifier for the motor pump.
  • Overcurrent protection circuit calibrated to 1 A with automatic disconnection.

Training module PID-547

PID CORRECTOR

  • Adjustment of corrector parameter values via potentiometric controls.
  • Selection of P, I, D correctors or any combination of the same.
  • Reset switch.

Training module ACONDICAUD-547

FLOW CONDITIONER

  • Pressure-difference flow sensor conditioner with offset and gain adjustment
  • Turbine flow sensor conditioner with frequency/ voltage converter and gain adjustment.

Training module ACONDINIV-547

ULTRASONIC AND CAPACITIVE LEVEL CONDITIONER

  • Ultrasonic level sensor conditioner with oscillator and offset and gain adjustment
  • Capacitive level sensor conditioner with oscillator and offset and gain adjustment

Training module NBP-547

FLOAT AND HYDROSTATIC PRESSURE CONDITIONER

  • Hydrostatic pressure sensor conditioner
  • Float type sensor conditioner.
  •  Offset and gain adjustment.

DESCRIPTION

Ref.: 9EQCAMD544

Included standard elements:

  • Table-mounted frame.
  • ALI-700 power supply module.
  • Series 540 model and specific modules.

Standard accessories:

  • Mains connection cable and 2 mm connectors.
  • Manual and Practical Manual.

FEATURES

Didactic unit MD-544

LEVEL AND FLOW OF A DEPOSIT

The model has a water-tight tank with two compartments, one to control the level and the other for drainage; there is a motorised pump which transfers the liquid from one place to another, and a set of sensors:

  • For levels, using a float with linear potentiometer.
  • For levels, by variable capacity.
  • For levels, by ultrasound.
  • For flow, by differences in hydrostatic pressure.
  • For flow, by turbine.
  • For hydrostatic pressure.

Printed connection terminals between the pump motor and the different sensors are included with the conditioning and control modules.


Training module CSS-547

SETTING AND DRIVER FOR PUMP MOTOR

  • Set point generator (adjustable ramp and step).
  • Power amplifier for the motor pump.
  • Overcurrent protection circuit calibrated to 1 A with automatic disconnection.

Training module PID-547

PID CORRECTOR

  • Adjustment of corrector parameter values via potentiometric controls.
  • Selection of P, I, D correctors or any combination of the same.
  • Reset switch.

Training module ACONDICAUD-547

FLOW CONDITIONER

  • Pressure-difference flow sensor conditioner with offset and gain adjustment
  • Turbine flow sensor conditioner with frequency/ voltage converter and gain adjustment.

Training module ACONDINIV-547

ULTRASONIC AND CAPACITIVE LEVEL CONDITIONER

  • Ultrasonic level sensor conditioner with oscillator and offset and gain adjustment
  • Capacitive level sensor conditioner with oscillator and offset and gain adjustment

Training module NBP-547

FLOAT AND HYDROSTATIC PRESSURE CONDITIONER

  • Hydrostatic pressure sensor conditioner
  • Float type sensor conditioner.
  •  Offset and gain adjustment.

Subscribe now


Loading...