For more info: sales@tangkasanugerah.com

Home / Products

SFG-2100 & SFG-2000

- DDS Technique and FPGA Chip Design
- Frequency Range : 0.1Hz~4/10MHz
- High Frequency Accuracy : ± 20ppm
- Frequency Resolution : 100mHz
- Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz
- Front Panel Setting Save/Recall with 10 Groups of Setting Memories
- Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only)
- INT/EXT AM/FM Modulation (SFG-2110 Only)
- LIN/LOG Sweep Mode(SFG-2110 Only)

DESCRIPTION

Based on the Direct Digital Synthesized (DDS) technology and unique FPGA design, the SFG-2000/2100 Series Function Generators are built with exceptionally high performance far exceeding that of any conventional function generators at a very competitive price. Stable output frequency, low distortion, and fine frequency resolution are the most remarkable characteristics of this product series.

The SFG-2000/2100 Series include four members in each family at 4MHz and 10MHz bandwidth(perivd), The SFG-2100 Series have additional functions of Sweep, AM/FM modulation, and External Counter. As a result of the 20ppm stability level and output waveform accuracy, The SFG-2000/2100 Series well fit into a wide variety of applications, such as signal generator for experiment labs, reference signal for PLL (Phase Locked Loop), and calibration and adjustment source for electronic devices.

FEATURES

  SFG-2000 Series SFG-2100 Series
Main
Frequency Range
(Sine, Square)
SFG-2004 : 0.1Hz ~ 4MHz
SFG-2010 : 0.1Hz ~ 10MHz
SFG-2110 : 0.1Hz ~ 10MHz
Frequency Range (Triangle) 0.1Hz~1MHz 
Frequency Resolution 0.1Hz
Frequency Stability ± 20 ppm
Frequency Accuracy ± 20 ppm
Aging ± 5 ppm /year
Output Function Sine, Square, Triangle
Amplitude Range 2mV~10Vpp(50Ω Load)
Impedance 50Ω±10%
Attenuator -20dB±1dB×2
DC Offset <-5V~>+5V(50Ω Load)
Duty Cycle 20% to 80%, 2Hz~1MHz (Only Square)
Range Resolution 1%
Display 9 位 LED display
SINE WAVE
Harmonics Distortion -55dBc,0.1Hz~200kHz; -40dBc,0.2MHz~4MHz; -30dBc,4MHz~10MHz
(Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level)
Flatness(Relative to 1kHz) <± 0.3dB,0.1Hz~1MHz; <± 0.5dB,1MHz~4MHz; <± 2dB, 4MHz~10MHz
TRIANGLE WAVE
Linearity ≧98%,0.1Hz~100kHz;≧95%,100kHz~1MHz
SQUARE WAVE
Symmetry ± 1% of period +4ns to 0.1Hz~100kHz
Rise or Fall Time ≦25ns at maximum output.(into 50 load)
CMOS Output
Level 4Vpp±1Vpp~15Vpp±1Vpp adjustable; Rise or Fall Time ≦120ns
TTL Output
Level ≧3Vpp ; Fan out; 20 TTL Load ;Rise and Fall Time ≦25ns
SWEEP OPERATION
Rate
 
- 100:1 ratio max. and adjustable 
(In order to get the maximum sweep span, the sweep time needs to be tuned on when adjusting the sweep span.)
Time 1Sec~30Sec adjustable 
(When the sweep time is too long, the stop frequency will reach and stay at the maximum frequency of the instrument until the end of the sweep cycle.)
Mode Lin./Log. switch selector
AMPLITUDE MODULATION
Depth & Modulation Frequency - 0~100% ; 400Hz(INT), DC~1MHz(EXT)
Carrier BW 100Hz~5MHz(-3dB)
EXT Modulation Sensitivity ≦ 10Vpp 100% modulation
FREQUENCY MODULATION
Deviation & Modulation Frequency - 0~±50kHz,center at 1MHz, 400Hz fixed(INT), 1kHz fixed(EXT)
EXT Modulation Sensitivity ≦ 10Vpp 在 10% modulation (center at 1MHz)
FREQUENCY COUNTER
Range - 5Hz~150MHz
Accuracy Time base accuracy±1位
Time base ±20ppm(23℃±5℃) after 30 minutes warm up後
Resolution 100nHz@1Hz, 0.1Hz@100MHz
Input Impedance 1MΩ/150pf
Sensitivity ≦ 35mVrms (5Hz~100MHz)
≦ 45mVrms (100MHz~150MHz)
STORE/RECALL FUNCTION
  10 groups of panel settings
POWER SOURCE  
  AC115V±10%, AC 230V+10%/-15%, 50/60Hz
Accessories
  User Manual×1
Power Cord x 1
GTL-101 x 1(SFG-2000 Series)
GTL-101× 2 (SFG-2110)
DIMENSION & WEIGHT 266(W)×107(H)×293(D) mm, Approx. 3.2kg

Subscribe now


Loading...