.jpg)
DESCRIPTION
Training module CRR-200
CORRECTION
Didactic module for regulation of current of a threephase load. It has been fitted with three current sensing devices, based on LEM cells with integrated conditioner circuit and three proportional-integral controllers with a PWM modulator at the output.
Training module CSI-200
ADAPTER SIGNAL ENCODER
Didactic module responsible for generating the three current set points required to control the converter that supplies the self-steering synchronous motor AL-906.
Training module REC-200
RECTIFIER BRIDGE
Training module which incorporates a monophase bridge rectifier. Needs 230 V. supply, monophase network voltage, providing 220V continuous voltage in the output. It can provide a maximum current of 7 A.
It has two ultra rapid fuses of 7 A. each, for protection of high currents and short circuits.
Training module AL-906
SELF-DRIVE SYNCHRONOUS MOTOR
This motor has an absolute encoder coupled to its shaft with three optical sensors enabling detection of rotor position every 60°. Mounted on a bedplate that can be quickly and easily coupled to other machines, tacho, brake, etc.
Its technical characteristics are as follows:
| Character | AL-906 |
|---|---|
| Reference | 9MAK0906ZC |
| Power | 370W |
| Nominal voltage | 230V |
| Nominal speed | 1500rpm |
| Shaft height | 80 |
 |
 |
FEATURES
Training module CRR-200
Ref.: MDULCRR200
Training module CSI-200
Ref.: MDULCSI200
Training module REC-200
Ref.: MDULREC200
Training module AL-906
SELF-DRIVE SYNCHRONOUS MOTOR
