For more info: 021 55734344

Home / Products

PPH-1503

- Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)
- 3.5 Inch TFT LCD Display
- Constant Voltage and Constant Current Operation
- Built-in DVM Measurement Function
- High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range) 
- EXternal Relay Control Output On/Off
- Sink Current Capability (Maximum:2A)
- Digital Panel Control
- Selectable Output and Input (DVM) Ports From Front or Rear Panel
- Key Lock Function
- 5 Sets of Preset Memory Including Power Output ON/OFF States
- High Speed Transient Recovery Time(<40us within 100mV ; <80us within 20mV)
- OVP/OCP/OTP Protection to Prevent DUT Damage
- Standard Multiple Interfaces: USB / LAN /GPIB
- Labview Driver and PC Remote Control Software

DESCRIPTION

PPH-1503 is a high-speed and high-precision DC Power Supply with dual range of 1 5V/3A or 9V/5A. PPH-"I 503 is exclusively designed to meet low power consumption requirements and users‘ great demands ofaccuracy, speed and resolution of both voltage and current. Circuits are designed with swift response capability to provide a stable voltage output while experiencing load changes. For example, when switching cellular phone from standby to talk mode, the current consumption will be dramatically changed within milliseconds.

FEATURES

DC GENERAL MEASUREMENT TIME CHOICES 0.01 ~ 10PLC1,0.01PLC/step
  AVERAGE READINGS 1~10
  TYPICAL READING TIME2,3 31ms

DC VOLTAGE OUTPUT
(23℃±5℃)

OUTPUT VOLTAGE 0~15V
  OUTPUT ACCURACY ± (0.05%+10mV)
  PROGRAMMING RESOLUTION 2.5mV
  READBACK ACCURACY3 ± (0.05%+3mV)
  READBACK RESOLUTION 1mV
  OUTPUT VOLTAGE RISING TIME 0.15ms (10% ~ 90%)
  OUTPUT VOLTAGE FALLING TIME 0.65ms (90% ~ 10%)
  LOAD REGULATION 0.01%+2mV
  LINE REGULATION 0.5mV
  STABILITY4 0.01%+0.5mV
  RECOVERY TIME(1000%LOAD CHANGE)

<40us (<100mV)
<80us (<20mV)

  RIPPLE AND NOISE5 1mV rms(0~1MHz)
8mVpp(20Hz~ 20MHz)

DC CURRENT
(23℃±5℃)

OUTPUT CURRENT

0 ~ 5A (0 ~ 9V)
0 ~ 3A (9 ~ 15V)

  SOURCE COMPLIANCE ACCURACY ±(0.16%+5mA)
  PROGRAMMED SOURCE RESOLUTION 1.25mA
  READBACK ACCURACY3

5A range: ±(0.2%+400uA)
5mA range: ±(0.2%+1uA)

   READBACK RESOLUTION

5A range: 100uA
5mA range: 0.1uA

  CURRENT SINK CAPACITY

0 ~ 5V: 2A
5 ~ 15V:(2A derate 0.1A)/V

  LOAD REGULATION 0.01%+1mA
  LINE REGULATION 0.5mA
  STABILITY4 0.01%+50uA
DVM INPUT VOLTAGE RANGE 0 ~ 20VDC
  INPUT IMPEDANCE 10Ω
  MAXIMUM INPUT VOLTAGE -3V, +22V
  READING ACCURACY3 ± (0.05%+3mV)
  READING RESOLUTION 1mV
PULSE CURRENT MEASUREMENT TRIGGER LEVEL 5mA ~ 5A, 5mA/step
  HIGH TIME/LOW TIME/AVERAGE TIME 33.3us to 833ms, 33.3us/step
  TRIGGER DELAY 0 ~ 100ms,10us/steps
  AVERAGE READINGS 1 ~ 100
  LONG INTEGRATION PULSE TIMEOUT 1S ~ 63S
  LONG INTEGRATION MEASUREMENT TIME 850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
  LONG INTEGRATION TRIGGER MODE Rising, Falling, Neither
OVP OVP RANGE OFF,ON (0 ~ 15.2V)
  RESOLUTION 10mV
  ACCURACY 50mV
Others PROGRAMMING IEEE-488.2(SCPI)
  USER_DEFINABLE POWER_UP STATES 5 sets
  REAR PANEL CONNECTOR 8Pin:output*4, sense*2, DVM*2
  TEMPERATURE COEFFICIENT 0.1* specification/ ˚C
  POWER CONSUMPTION 150VA
  REMOTE/LOCATION CONNECTOR USB/GPIB/LAN
  RELAY CONTROL CONNECTOR 150mA/15V  5Voutput, 100mA
Insulation Chassis and Terminal 20MΩ or above (DC 500V)
  Chassis and AC cord 30MΩ or above (DC 500V)
Operation Environment

 

Indoor use, Altitude: ≤ 2000m
Ambient temperature: 0 ~ 40°C
Relative humidity: ≤ 80%

Installation category: II, Pollution degree: 2
STORAGE Environment   TEMPERATURE: -20˚C  ~ 70˚C 
HUMIDITY: < 80%
INPUT POWER   90-264VAC, 50/60Hz 6
Accessories  

CD 8cmUser manual x1, Quick Start manual x1 
Test lead GTL-117 x 1, GTL-203A x 1, GTL-204A x 1

Dimensions   222 (W) x 86 (H) x 363 (D) mm
Weight   Approx. 4.2kg
     
 Remarks  
  1. PLC=PowerLineCycle, 1PLC = 16.7ms for 60Hz operation, 20ms for 50Hz operation;
  2. Display OFF, Speed includes measirement and binary data transfer out of GPIB;
  3. PLC=1;
  4. STABILITY:Following 15 minute warm-up, the change in output over 8 hours under ambient temperature, constant load, and line operating conditions;
  5. The ground ring of the probe is pressed directly against the output ground of the power supply and the tip is in contact with the output voltage pin.
  6. Auto detected at power-up;

Subscribe now


Loading...