DESCRIPTION
Technical Description
The system is used in conjunction with the transducer sets CT 400.16 and CT 400.17. Each of the sets consists of a pressure transducer and a TDC sensor. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 400.01 and CT 400.02 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the average pressure and the indicated power output.
The system consists of a software and a measuring amplifier for the pressure transducer and TDC sensor.
Learning Objectives / Experiments
- Familiarisation with and use of an electronic cylinder pressure indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- Pressure curve for gas cycle (top right)
- Determination of indicated power output from p-V diagram
FEATURES
Specification
[1] Cylinder pressure indication system for internal combustion engine
[2] Only to be used in conjunction with CT 400.16 or CT 400.17 transducers
[3] Chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] Representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] System consists of measuring amplifier and software for Windows Vista or Windows 7
Technical Data
Measuring amplifier: amplification factor 20mbar/mV
TDC sensor trigger distance: 1mm
Dimensions and Weight
LxWxH: 270x250x100mm (amplifier)
Weight: approx. 4kg Required for Operation 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 measuring amplifier
1 software + USB cable
1 manual
