AFG 200/100
Features
- Frequency range: 1uHz~25MHz
- 1uHz frequency resolution
- Built-in 120 MSa/s, 10 bit resolution and arbitrary waveform editing function with 4k point memory
- Dual channel models support coupling, tracking, and phase functions
- Square waveform can adjust the duty cycle from 1% to 99%.
- Support various arbitrary waveform editing methods.
- Built-in AM/FM/PM/FSK/SUM(AFG-225/225P) modulation, sweep and burst functions
- USB interface signal control
- AFG-125P/225P provide three DC power selections
DESCRIPTION
GW Instek launches the brand new AFG-100/200 series 25MHz USB modular arbitrary function generator with four models for selections. The AFG-100/200 series arbitrary function generator with many unique features such as light weight, handy, and USB interface compatible is an ideal choice for the applications at the general laboratories in applying stand-alone operation or collocation with the GDS-2000A series digital oscilloscope.
 |
 |
| AFG-225P Front Panel | AFG-225P Rear Panel |
The main features of the AFG-100/200 series are output amplitude of 2.5Vpp (connecting with a load of 50 ohms), frequency range reaching 25MHz, frequency resolution of 1uHz, and built-in sine waveform, square waveform, triangle waveform, and noise signal. Square waveform can adjust the duty cycle from 1% to 99% and it can be utilized as pulse signal. Users, via the GDS-2000A FG APP, can select from the 66 built-in function waveforms to conduct arbitrary waveform editing. The AFG-100/200 series, with functions of AM/FM/PM/FSK/SUM modulation, frequency sweep, burst and coupling, is suitable for various communications applications.
The AFG-100/200 series collocates with the FG APP of GDS-2000A digital oscilloscope through USB interface. While conducting stand-alone operation, the AFG-100/200 series utilizes USB interface, which allows users to quickly set up their required tests by the simple connection feature. AWES (arbitrary waveform editing software) PC software is provided to enter settings speedily and easily for measurement. Users can select required waveforms from arbitrary waveform editor.
 |
 |
| 1. Stand-alone operation with PC software | 2. Collocation with the GDS-2000A series DSO operation |
FEATURES
| MODEL NUMBER | AFG-125 / AFG-125P | AFG-225 / AFG-225P | ||
| OUTPUT CHANNELS | 1 | 2 | ||
| WAVEFORMS | Sine, Square, Ramp, Pulse, Noise, ARB | |||
|
ARBITRARY |
Sample Rate | 120 MSa/s | ||
| Repetition Rate | 60MHz | |||
| Waveform Length | 4k points | |||
| Amplitude Resolution | 10 bits | |||
| Non-Volatile Memory | 4k points | |||
|
FREQUENCY |
Range | Sine/Square | 1uHz~25MHz | |
| Ramp | 1uHz~1MHz | |||
| Resolution | 1uHz | |||
| Accuracy | Stability | ±20 ppm | ||
| Aging | ±1 ppm, per 1 year | |||
| Tolerance | ≤1 mHz | |||
|
OUTPUT |
Amplitude | Range |
GPA-501 power supply: 1mVpp to 2.5Vpp (into 50Ω), 2mVpp to 5Vpp (open-circuit) USB power supply : 1mVpp to 2Vpp (into 50Ω), 2mVpp to 4Vpp (open-circuit) |
|
| Accuracy | ±2% of setting ±1 mVpp (at 1 kHz) | |||
| Resolution | 1mV or 3 digits | |||
| Flatness | ±1% (0.1dB) ≤100kHz, ±3% (0.3 dB) ≤5MHz,±5% (0.4 dB) ≤12MHz, ±10%(0.9dB) ≤25MHz(sine wave relative to 1kHz) | |||
| Units | Vpp, Vrms, dBm | |||
| Offset | Range |
GPA-501 power supply: ±1.25 Vpk ac +dc (into 50Ω), ±2.5Vpk ac +dc (Open circuit) USB power supply: ±1 Vpk ac +dc (into 50Ω),±2 Vpk ac +dc (Open circuit) |
||
| Accuracy | 2% of setting + 10mV+ 0.5% of amplitude | |||
| WAVEFORM OUTPUT | Impedance | 50Ω typical (fixed), > 10MΩ (output disabled) | ||
| Protection | Short-circuit protected. Overload relay automatically disables main output. | |||
|
SINE WAVECHARACTERISTICS |
Harmonic Distortion |
≤-50 dBc DC ~ 1MHz, Ampl > 1Vpp |
||
|
SQUARE WAVECHARACTERISTICS |
Rise/Fall Time | ≤10ns at maximum output. (into 50 Ω load) | ||
| Overshoot | <2% | |||
| Asymmetry | 1% of period +5 ns | |||
| Variable duty Cycle |
1.0% to 99.0% ≤100kHz |
|||
|
RAMPCHARACTERISTICS |
Linearity | < 0.1% of peak output | ||
| Variable Symmetry | 0% to 100% (0.1% Resolution) | |||
|
PULSECHARACTERISTICS |
Period | 40ns~2000s | ||
| Pulse Width | 20ns~1999.9s | |||
| Overshoot | <2% | |||
| Accuracy | 0.1%+20ns | |||
| Jitter | 20ppm +10ns | |||
| AM MODULATION | Carrier Waveforms | Sine, Square, Ramp, Pulse, Arb | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||
| Modulating Frequency | 2mHz to 20kHz | |||
| Depth | 0% to 120.0% | |||
| Source | Internal | |||
| FM MODULATION | Carrier Waveforms | Sine, Square, Ramp, | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||
| Modulating Frequency | 2mHz to 20kHz | |||
| Peak Deviation | DC to Max Frequency | |||
| Source | Internal | |||
| SWEEP | Waveforms | Sine, Square, Ramp, | ||
| Type | Linear or Logarithmic | |||
| Start/Stop Freq | 1uHz to Max Frequency | |||
| Sweep Time | 1ms to 500s | |||
| Source | Internal / Manual | |||
| FSK | Carrier Waveforms | Sine, Square, Ramp, Pulse | ||
| Modulating Waveforms | 50% duty cycle square | |||
| Modulation Rate | 2mHz to 100 kHz | |||
| Frequency Range | 1uHz to Max Frequency | |||
| Source | Internal | |||
| PM | Carrier Waveforms | Sine, Square, Ramp | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||
| Modulation Rate | 2mHz to 20kHz | |||
| Phase deviation | 0˚ to 360˚ | |||
| Source | Internal | |||
| SUM | Carrier Waveforms | Sine, Square, Ramp, Pulse, Noise | ||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||
| Modulation Rate | 2mHz to 20kHz | |||
| SUM Depth | 0% to 100.0% | |||
| Source | Internal | |||
| SYNC OUTPUT | Type | Sync, Sweep Marker, Burst Marker or Arbitrary Waveform Marker | ||
| Level | TTL Compatible into 50Ω | |||
| Assignment | Channel 1 or Channel 2 | |||
| Polarity | Normal or Inverted | |||
| Fan-out | ≥4 TTL Load | |||
| Impedance | 50Ω Typical | |||
| DUAL CHANNEL FUNCTION | Phase | -180˚ ~180˚ (Square and Pulse can not be change, Phase is 0°) | ||
| Track | Synchronize phase | |||
| Coupling |
CH2=CH1 OR CH1=CH2 |
|||
| BURST | Waveforms | Sine, Square, Ramp, Arb | ||
| Frequency | 1uHz~15 MHz(sine) 1uHz~15 MHz(Square) 1uHz~1 MHz (Ramp |
|||
| Burst Count | 1 to 65535 cycles or Infinite | |||
| Start/Stop Phase | -360 to +360 | |||
| Internal Period | 1ms to 500s | |||
| Gate Source | External Trigger | |||
| Trigger Source | Single or Internal Rate | |||
| TRIGGER DELAY | N-Cycle, Infinite | 0s to 655350ns | ||
| SAVE/RECALL | 10 Groups of Setting Memories | |||
| POWER OUTPUT | Only AFG-125P/AFG-225P |
Output Voltage : (2.5V/3.3V/5V)±5%, |
||
| INTERFACE | USB (Device) | |||
| GENERAL SPECIFICATIONS | Power Source | DC 5V | ||
| Power Consumption | 10 W (Max) | |||
| Operating Environment | Temperature to satisfy the specification : 18 ~ 28˚C , Operating temperature : 0 ~ 40˚C ,Relative Humidity: ＜ 80%, 0 ~ 40˚C,Installation category： CAT II | |||
| Operating Altitude | 2000 Meters | |||
| Storage Temperature | -10~70˚C, Humidity: ≤70% | |||
| Dimensions (WxHxD) | 215(W) x 35 (H) x 107(D) mm | |||
| Weight | Approx. 1kg | |||
